复合固体推进剂等效力学性能VCFEM细观预示方法

根据固体推进剂的细观结构特征,采用等圆最优装载方式生成代表性体积单元(Representative Volume Element,RVE)模型,并结合Voronoi单元有限元方法(Voronoi Cell Finite Element Method,VCFEM)和均匀化方法,发展了一种可预示固体推进剂等效力学性能的数值分析方法,从而得到体分比和组分材料对等效模量和等效泊松比的影响规律。为证明该方法的有效性,设计一个对称数值模型,通过对该方法和传统有限元方法的节点位移结果的比较,发现两者之间的相对误差小于5%,且VCFEM用少量单元就完成了分析,提高了计算效率。通过对不同细观结构下推进剂RVE模型的计算,发现随着夹杂体分比的增大,夹杂的颗粒增强效应越明显,基体材料的变化比夹杂材料对等效力学性能有着更加显著的影响。     

某型引信压电陶瓷加速老化试验

压电陶瓷作为压电引信的关键元件,其贮存可靠性至关重要。为研究贮存对压电陶瓷性能变化的影响,进行了历时176天的某型引信用压电陶瓷加速老化试验。根据试验结果研究了陶瓷的压电参数随试验条件和老化时间变化的规律,探索了压电陶瓷的贮存可靠性和可靠贮存寿命。     

含诱导缺陷复合材料T型接头的弯曲失效实验

通过实验研究含不同诱导缺陷的复合材料T型接头的弯曲力学性能和失效过程,采用引入脱黏缺陷和三角区填充率缺陷来诱导T型接头的不同失效模式。结果表明不同失效模式下T型接头所表现出来的弯曲力学性能差异极大,完好的T型接头所能承受的载荷为288.5N,界面脱黏会削弱其30%的承载能力,而三角区填充率的减少会导致裂纹在填充区内部引发和扩展,导致T型接头的弯曲力学性能大幅降低。     

先驱体转化致密SiC纳米复合材料的制备及其热电性能

以聚碳硅烷和锑改性聚硅烷为先驱体,利用先驱体转化SiC材料的富余自由碳高温石墨化的微观结构演变特点,采用热压烧结、先驱体浸渍—裂解法以及退火工艺制备出先驱体转化SiC纳米复合材料。采用SEM、TEM、XRD和Raman等测试手段表征和分析了相组成和微观结构,讨论了样品的热导率、电导率和塞贝克系数等热电参数随温度变化关系。研究表明,所得致密SiC纳米复合材料为n型热电材料。由于纳米石墨的作用,材料热导率抑制在4–8W/(m?K)范围。1600°C退火处理能够降低热导率,同时提高电导率和塞贝克系数绝对值,使先驱体转化法得到的SiC纳米复合材料无量纲热电优值ZT达到0.0028（650°C）,高于其他已报道的致密SiC/C复合材料和纳米复合材料体系。     

Bivariate models from univariate life distributions: A characterization cum modeling approach

Bivariate life distribution models are of importance for studying interdependent components. We present a generic approach by introducing a new concept of characterized model in stead of a characterized distribution. It strikes a balance between characterization and modeling approaches to eliminate their individual limitations and incorporate their respective strengths. The proposed model, being a characterized one, admits many important properties irrespective of the choice of marginal distributions. The retention of univariate IFR, DFR, IFRA, DFRA, NBU, and NWU class properties in the bivariate setup has been ensured along with some results on series combinations and convolution. No other models, available in the literature, can ensure simultaneous retention of these fundamental and extremely important class properties. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

老化对阻燃玻璃钢燃烧性能影响初探

通过对玻璃钢阻燃技术的介绍,以及老化对玻璃钢性能的影响,提出阻燃玻璃钢材质在自然环境中同样存在因老化而出现阻燃性降低的问题。     

Mechanical properties and thermal conductivity of pristine andfunctionalized carbon nanotube reinforced metallic glass composites:A molecular dynamics approach

This work uses the molecular dynamics approach to study the effects of functionalization of carbon nanotubes (CNTs) on the mechanical properties of Cu64Zr36 metallic glass (MG). Three types of functional groups, carboxylic, vinyl and ester were used. The effect of CNT volume fraction (Vf) and the number of functional groups attached to CNT, on the mechanical properties and thermal conductivity of CNT-MG composites was analysed using Biovia Materials Studio. At lower values of Vf (from 0 to 5％), the per-centage increase in Young's modulus was approximately 66％. As the value of Vf was increased further (from 5 to 12％), the rate of increase in Young's modulus was reduced to 16％. The thermal conductivity was found to increase from 1.52 W/mK at Vf=0％to 5.88 W/mK at Vf=12％, thus giving an increase of approximately 286％. Functionalization of SWCNT reduced the thermal conductivity of the SWCNT-MG composites.     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

This work provides a method to predict the three-dimensional equivalent elastic properties of the filament-wound composites based on the multi-scale homogenization principle.In the meso-scale,a representative volume element(RVE)is defined and the bridging model is adopted to establish a theoretical predictive model for its three-dimensional equivalent elastic constants.The results obtained through this method for the previous experimental model are compared with the ones gained respec-tively by experiments and classical laminate theory to verify the reliability of this model.In addition,the effects of some winding parameters,such as winding angle,on the equivalent elastic behavior of the filament-wound composites are analyzed.The rules gained can provide a theoretical reference for the optimum design of filament-wound composites.     

Improvement of VIS and IR camouflage properties by impregnating cotton fabric with PVB/IF-WS2

In order to examine the possibility to improve its camouflage properties standard cotton fabric with camouflage print was impregnated with poly(vinyl butyral), PVB and fullerene-like nanoparticles of tungsten disulfide, PVB/IF-WS₂. FTIR analysis excluded any possible chemical interaction of IF-WS₂ with PVB and the fabric. The camouflage behavior of the impregnated fabric has been examined firstly in the VIS part of the spectrum. Diffuse reflection, specular gloss and color coordinates were measured for three different shades (black, brown and dark green). Thermal imaging was applied to examine the camouflage abilities of this impregnation in IR part of the spectrum. The obtained results show that PVB/IF-WS₂ impregnation system induced enhacement of the materials camouflage properties, i.e. that IF-WS₂ have a positive effect on spectrophotometric characteristics of the fabric.